Upcoming Events – AGC-GM
Loading Events

← Back to Events

Hyatt Place Downtown Milwaukee

+ Google Map
800 W. Juneau Ave.
Milwaukee, WI 53233 United States
(414) 808-3880
September 30 @ 4:30 pm - 7:30 pm
Hyatt Place Downtown Milwaukee, 800 W. Juneau Ave.
Milwaukee, WI 53233 United States
+ Google Map

OSHA’s Silica Awareness

About 2.3 million workers are exposed to respirable crystalline silica in their workplaces, including 2 million construction workers who drill, cut, crush, or grind silica-containing materials such as concrete and stone. Responsible employers have been protecting workers from harmful exposure to respirable crystalline silica for years, using widely-available equipment that controls dust with water or a vacuum system. OSHA’s new Silica Standard is scheduled to take effect in November 2018. Find out what this new standard means to your operation.

October 5 @ 4:30 pm - 7:30 pm
Hyatt Place Downtown Milwaukee, 800 W. Juneau Ave.
Milwaukee, WI 53233 United States
+ Google Map

STP Unit 2: Communication

Dates: October 5, 7, 12 & 14, 2020 Must attend three of the four nights. This course presents a body of knowledge and skills that today’s construction supervisors need in order to be effective communicators on their job. Unit 2 Explores: Effective Communication Learn to Listen Carrying on Conversations Persuasion, Negotiation and Confrontation Communicate with your crew Putting it in writing Meetings that Work Electronic Communication Improving Communication

October 6 @ 7:00 am - 3:30 pm
Hyatt Place Downtown Milwaukee, 800 W. Juneau Ave.
Milwaukee, WI 53233 United States
+ Google Map

OSHA 30-Hour for Construction

Dates: October 6, 12, 20 & 27, 2020 Must attend all four days. The OSHA 30-Hour training is designed for construction workers or managers with safety and health responsibilities.  Students learn to identify common hazards found on construction sites, and develop strategies to prevent injuries.  Although OSHA standards are discussed, this training emphasizes hazard identification, avoidance, control and prevention.  Upon successful completion of this course, you will receive an OSHA 30-Hour card as proof of compliance with OSHA mandates.

October 15 @ 4:30 pm - 6:30 pm
Hyatt Place Downtown Milwaukee, 800 W. Juneau Ave.
Milwaukee, WI 53233 United States
+ Google Map

Foundations for Safety Leadership (FSL)

Everyone, from the company owner to the experienced foreman and new trainee/apprentice, needs to own safety and be a safety leader.  The Foundations for Safety Leadership (FSL) course is designed to introduce construction workers, particularly those with supervisory responsibilities such as foremen, to safety leadership principles and give them the skills to be a safety leader who can help create and sustain safe and productive jobsites.

October 21 @ 4:30 pm - 7:30 pm
Hyatt Place Downtown Milwaukee, 800 W. Juneau Ave.
Milwaukee, WI 53233 United States
+ Google Map

Mobile Elevated Work Platforms (MEWP)

Mobile elevated work platforms, also known as aerial lifts or MEWPs, are popular on a variety of job sites.  The American National Standards Institute (ANSI) defines a mobile elevated work platform as "a machine/device intended for moving persons, tools and material to working positions," and consisting of a work platform with controls and an extending structure mounted on a mobile chassis.  ANSI updated their A92 standards with new safe use, training and design requirements for MEWPs.  If your company uses…

October 28 @ 4:00 pm - 8:00 pm
Hyatt Place Downtown Milwaukee, 800 W. Juneau Ave.
Milwaukee, WI 53233 United States
+ Google Map

Crane Rigging Training

Cost plus materials. In addition to qualified signalpersons and certified operators, the new OSHA crane standard requires employees who perform rigging operations to be “qualified”.  This course has been developed by the Crosby Group to assist employers in qualifying their personnel as qualified riggers as required in the new crane standards.  The standard also requires an experience component which is not provided in this course.  Note: This course is four hours in length.  To receive a card verifying their attendance…

October 29 @ 4:30 pm - 7:30 pm
Hyatt Place Downtown Milwaukee, 800 W. Juneau Ave.
Milwaukee, WI 53233 United States
+ Google Map

Qualified Crane Signalperson Training

OSHA requires you to meet new requirements under the New Crane Standard for Construction Operations – Subpart CC.  Effective in November of 2010, anyone performing crane signals on a construction site has to be “qualified”.  If your employees fit into this category, they must: be competent in the application of the types of signals used, have a basic understanding of crane operations and the limitations, know and understand the new crane standard as it applies to signaling, and demonstrate all…

November 2 @ 4:30 pm - 7:30 pm
Hyatt Place Downtown Milwaukee, 800 W. Juneau Ave.
Milwaukee, WI 53233 United States
+ Google Map

STP Unit 4: Contract Documents

Dates: November 2, 4, 9 & 11, 2020 Must attend three of the four nights. This course will provide information about contract documents and construction law to help supervisors recognize the roles and responsibilities of all contracted parties, to develop an understanding of how contract documents can be helpful to solve problems and resolve conflicts, and to develop positive relationships between all parties in the construction process. Unit 4 Explores: Introduction to contract documents and construction law Creating a positive…

November 17 @ 8:00 am - 5:00 pm
Hyatt Place Downtown Milwaukee, 800 W. Juneau Ave.
Milwaukee, WI 53233 United States
+ Google Map

Mobile Elevated Work Platforms (MEWP)

Mobile elevated work platforms, also known as aerial lifts or MEWPs, are popular on a variety of job sites.  The American National Standards Institute (ANSI) defines a mobile elevated work platform as "a machine/device intended for moving persons, tools and material to working positions," and consisting of a work platform with controls and an extending structure mounted on a mobile chassis.  ANSI updated their A92 standards with new safe use, training and design requirements for MEWPs.  If your company uses…

November 30 @ 4:30 pm - 7:00 pm
Hyatt Place Downtown Milwaukee, 800 W. Juneau Ave.
Milwaukee, WI 53233 United States
+ Google Map

OSHA 10-Hour for Construction

Dates: November 30 & December 1, 2, 3, 2020 Must attend all four nights. Need your OSHA 10-Hour training card to get on the job?  You’ve come to the right place!  This 10-hour construction safety course was developed by the US Department of Labor to provide construction workers, supervisors, and other personnel responsible for construction activities with an awareness of construction safety and health concerns in the construction industry.  All attendees will become familiar with reading and using the OSHA…

December 7 @ 4:30 pm - 7:30 pm
Hyatt Place Downtown Milwaukee, 800 W. Juneau Ave.
Milwaukee, WI 53233 United States
+ Google Map

STP Unit 6: Risk Management and Problem Solving

Dates: December 7, 9, 14 & 16 Must attend three of the four nights. This course will cover the roles and responsibilities of a construction supervisor in accident prevention and loss control. Unit 6 explores: Safety leadership, communication and expectations Planning for site safety Site safety management Site security and protection Multi-employer safety Construction risk management Safety and Human Resources Regulatory procedures, record keeping and documents