Upcoming Events – AGC-GM
Loading Events

← Back to Events

AGC Milwaukee

+ Google Map
1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
August 27 @ 4:30 pm - 7:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

Basic First Aid/CPR/AED Training

Dates: August 27 & 28, 2019 Must attend both nights. Medic First Aid, CPR, and AED training is designed specifically for the occupational first aid provider.  This extremely valuable program will help employers comply with OSHA and other federal and state regulatory requirements for training employees on how to respond and care for medical emergencies at work.  Two-year certification cards are issued upon completion of this course.

September 5 @ 4:30 pm - 6:00 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

The Economics of Safety

Today’s challenging economic climate is not the time to back off on safety, but instead to charge ahead with communicating the importance of an accident-free workplace.  Establishing safety objectives and defining responsibilities has never been as critical as it is today.  Holding people accountable for their actions and evaluating their performance can have a big impact on the bottom line.  At one organization, the average cost of a shoulder injury was $50,000, a back injury was $35,000, a knee injury…

September 9 @ 4:30 pm - 7:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

STP Unit 3: Planning and Scheduling

Dates: September 9, 11, 16 & 19, 2019 Must attend three of the four nights. This course will help construction supervisors understand ways in which planning and scheduling saves time and money, while increasing quality in the construction process. Unit 3 Explores: Preparing the project plan Communicating the plan The critical path Computer use in scheduling Using the schedule on the job-site Updating the construction schedule The schedule as documentation Using planning and scheduling

September 17 @ 4:30 pm - 7:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

Rough Terrain Forklift Operator Training

Rough terrain forklift training vividly impresses upon the students the necessity for safety in all aspects of lift truck operations and procedures.  The safety standards reviewed in detail include graphic illustrations of the personal and economic dangers inherent in the use of forklift equipment.  The step-by-step progression of this training is designed to provide the student with the knowledge and skills to become a safe and professional forklift operator.  This is the classroom portion of the total training requirement for…

September 24 @ 8:00 am - 11:00 am
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

Subcontractor Clauses That Will Improve Your Profitability

Construction is a high-stakes, risky business and misunderstandings often arise from unclear or unreviewed contract provisions.  Situations are made more complex when key or even innocuous clauses are modified.  Unless identified and accounted for properly, additional responsibilities and liability add financial risk to a project and your company's bottom line. To help subcontractors mitigate these risks, the AGC is hosting a seminar designed to identify key subcontract provisions, review common modifications and understand the interrelation between the subcontract and prime…

September 24 @ 4:30 pm - 7:00 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

OSHA 10-Hour for Construction

Dates: September 24, 26, October 1 & 3, 2019 Must attend all four nights. Need your OSHA 10-Hour training card to get on the job?  You’ve come to the right place!  This 10-hour construction safety course was developed by the US Department of Labor to provide construction workers, supervisors, and other personnel responsible for construction activities with an awareness of construction safety and health concerns in the construction industry.  All attendees will become familiar with reading and using the OSHA…

October 7 @ 8:00 am - 4:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

Construction Supervisory Fundamentals (CSF)

Dates: October 7, 9, 14, 16, 21 & 28, 2019 An Introductory Course for Foremen & Future Construction Supervisors Construction Supervision Fundamentals (CSF) is designed specifically for entry level positions throughout the construction industry.  Developed, updated, and field tested by contractors for contractors, this course focuses on the knowledge, skills and attitudes required for effective construction leadership.  It is especially appropriate for those who are new supervisors or newly promoted foremen, or for anyone who seeks career advancement in leading…

October 8 @ 7:00 am - 3:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

OSHA 30-Hour for Construction

Dates: October 8, 15, 22 & 29, 2019 Must attend all four days. The OSHA 30-Hour training is designed for construction workers or managers with safety and health responsibilities.  Students learn to identify common hazards found on construction sites, and develop strategies to prevent injuries.  Although OSHA standards are discussed, this training emphasizes hazard identification, avoidance, control and prevention.  Upon successful completion of this course, you will receive an OSHA 30-Hour card as proof of compliance with OSHA mandates.

October 15 @ 4:30 pm - 7:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

Qualified Crane Signalperson Training

OSHA requires you to meet new requirements under the New Crane Standard for Construction Operations – Subpart CC.  Effective in November of 2010, anyone performing crane signals on a construction site has to be “qualified”.  If your employees fit into this category, they must: be competent in the application of the types of signals used, have a basic understanding of crane operations and the limitations, know and understand the new crane standard as it applies to signaling, and demonstrate all…

October 17 @ 4:00 pm - 8:00 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

Crane Rigging Training

Cost plus materials. In addition to qualified signalpersons and certified operators, the new OSHA crane standard requires employees who perform rigging operations to be “qualified”.  This course has been developed by the Crosby Group to assist employers in qualifying their personnel as qualified riggers as required in the new crane standards.  The standard also requires an experience component which is not provided in this course.  Note: This course is four hours in length.  To receive a card verifying their attendance…

October 23 @ 4:30 pm - 7:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

Basic First Aid/CPR/AED Training

Dates: October 23 & 24, 2019 Must attend both nights Medic First Aid, CPR, and AED training is designed specifically for the occupational first aid provider.  This extremely valuable program will help employers comply with OSHA and other federal and state regulatory requirements for training employees on how to respond and care for medical emergencies at work.  Two-year certification cards are issued upon completion of this course.

November 4 @ 4:30 pm - 7:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

STP Unit 2: Communication

Dates: November 4, 6, 11 & 13, 2019 Must attend three of the four nights. This course presents a body of knowledge and skills that today’s construction supervisors need in order to be effective communicators on their job. Unit 2 Explores: Effective Communication Learn to Listen Carrying on Conversations Persuasion, Negotiation and Confrontation Communicate with your crew Putting it in writing Meetings that Work Electronic Communication Improving Communication

November 5 @ 4:30 pm - 6:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

Foundations for Safety Leadership (FSL)

Everyone, from the company owner to the experienced foreman and new trainee/apprentice, needs to own safety and be a safety leader.  The Foundations for Safety Leadership (FSL) course is designed to introduce construction workers, particularly those with supervisory responsibilities such as foremen, to safety leadership principles and give them the skills to be a safety leader who can help create and sustain safe and productive jobsites.

November 7 @ 4:30 pm - 6:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

Successfully Handling an OSHA Inspection

Employers do have rights during the inspection process, but you must be aware of what they are if you hope to exercise them.  As OSHA continues to change the way it does business, it’s more likely your job-site will be inspected.  The more you know about handling an OSHA inspection, the more likely your experience will be less painful and costly.  This course will help you find out what you may be doing that catches the eye of the trained…

November 19 @ 4:30 pm - 7:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

OSHA’s Silica Standard

About 2.3 million workers are exposed to respirable crystalline silica in their workplaces, including 2 million construction workers who drill, cut, crush, or grind silica-containing materials such as concrete and stone. Responsible employers have been protecting workers from harmful exposure to respirable crystalline silica for years, using widely-available equipment that controls dust with water or a vacuum system. OSHA’s new Silica Standard is scheduled to take effect in November 2018. Find out what this new standard means to your operation.

December 2 @ 4:30 pm - 7:30 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

STP Unit 4: Contract Documents

Dates: December 2, 4, 9 & 11, 2019 Must attend three of the four nights. This course will provide information about contract documents and construction law to help supervisors recognize the roles and responsibilities of all contracted parties, to develop an understanding of how contract documents can be helpful to solve problems and resolve conflicts, and to develop positive relationships between all parties in the construction process. Unit 4 Explores: Introduction to contract documents and construction law Creating a positive…

December 3 @ 4:30 pm - 7:00 pm
AGC Milwaukee, 1243 N 10th St., Ste 175
Milwaukee, WI 53205 United States
+ Google Map

OSHA 10-Hour for Construction

Dates: December 3, 5, 10 & 12, 2019 Must attend all four nights. Need your OSHA 10-Hour training card to get on the job?  You’ve come to the right place!  This 10-hour construction safety course was developed by the US Department of Labor to provide construction workers, supervisors, and other personnel responsible for construction activities with an awareness of construction safety and health concerns in the construction industry.  All attendees will become familiar with reading and using the OSHA standards…